Company
Development projects
Lotus Elise Esthi











With the ESTHI we are offering a road-traffic-admitted racing vehicle
This is the exciting objective of the Brandes & Dschüdow Automobilmanufaktur GmbH&Co KG i.G. in Münster, Germany.
At the small-series-producers’ first project the excellent lightweight properties of the basic vehicle Elise meet up with engines of 173 kW (235 HP) or 308 KW (420 HP) respectively.
The Brandes & Dschüdow Automobile Manufacture has succeeded in winning over extremely competent partners like TEKNO Engineering and the MOT for this project.
Automobile engineers of TEKNO Engineering have been reflecting the reconstruction work of the Brandes & Dschüdow Automobile Manufacture, and with their technological management and surveillance they provide a high degree of perfection and safety.
The 4-cylinder compressor engine with 173 kW (235 HP) and the “short”- or “long”-tuned gear system, as well as the 6-cylinder bi-turbo-engine with the appropriate 6-gear system, are technological highlights. They generate a breath-taking power / weight ratio of less than 3.4 and 2.4 kg/HP respectively.
Lotus Elise EsthiTo ensure a smooth success of the project the MOT’s professional advice is included in all implementations. Part of this is the monitoring of a long-term test under minimum speed at the Nürburgring. The aerodynamic “final examination” has shown excellent output figures. The result of the joint work is a fully matured driving machine with an unladen weight of only about 785 or 998 kg.
GEAR SYSTEM
The gearbox changes fantastically, in top gear you already look forward to changing down again
As a part from the same family the gearbox fits the engine perfectly .This manual 6-gear system runs the exorbitant torque supremely.
ENGINE
At 308 kW (420 HP) and a maximum torque of 520 NM at 4500 RPM the ESTHI establishes itself with her performance among the strongest road-legal vehicles in the world
Due to its type of construction the 30-valve bi-turbo engines come into operation here. These fulfill the requirements for excellent power curves as well as the Euro-3-standard and all other pre-determined installation standards.
| Engine | V6, Bi-Turbo mid-engine |
| Valves per cylinder | 5 |
| Displacement | 2671 ccm |
| Compression ratio | 9,5 : 1 |
| HP in Kw / PS | 308/420 |
| Max Torque in Nm | 520 at 4500 RPM |
| Gearbox | 6 gear, manual, rear wheel driven |
| Suspension | Wilbers suspension, adjustable in rebound valving, compression and ride height |
| Brakes | 320 mm disk diameter, 4-piston calipers front, cross-drilled and ventilated |
| ABS | optional |
| Tyres front | 225/25 ZR 18 front |
| Tyres rear | 265/30 ZR19 rear mounted on OZ Superleggera III |
| Luggage compartment | 50 litres |
| Fuel tank | original, 58 L optional |
| Length/Width/Height in mm | 3793/1769/1143 |
| Wheelbase in mm | 2318 |
| Track in mm F/R | 1478/1524 |
| Unladen Weight | 998 kg |
| Max additional weight | 250 kg |
| Top Speed | ca. 305 km/h |
| Acceleration 0 – 100 km/h | ca. 3,75 sec |